ไม่ทราบว่าทำตาม นี้หรือยังครับ
1. Put "UTILITY" folder in Primo's root
2. Open UTILITY\utility.ini and check DirContent= for example:
\SDMMC\NNG\Content or \Storage Card\Primo\content or ...)
3. Check ExeName= (iGo.exe or Primo.exe or ...)
4. In Content folder create subfolders: map (if your default are TA maps), map_nt (for NT),
map_ot (for other maps) and copy to each folder at least 1 map.
5. For change POI together with maps, set: swpoi=1 and create same folder
structure as for maps (poi, poi_nt, poi_ot)
Similarly can be configured to switching the following folders:
BUILDING (swbuilding=1, folders building_ta, building_nt, building_ot),
HISTSPEED (swhistspeed=1, folders histspeed_ta, histspeed_nt, histspeed_ot),
PHONEME (swphoneme=1, folders phoneme_ta, phoneme_nt, phoneme_ot).
6. For correct map provider determination please place to each
map folder one small file (may be empty, only the name is relevant.
Examples are in the folder '_copy_to_the_corresponding_map_folder'):
!map_ta.txt - for the TA maps
!map_nt.txt - for the Navteq maps
!map_ot.txt - for other provider's maps
In this case the skin will set the provider correctly during program
start and prevent displaying wrong provider that can be caused by possible
Mapchanger's fault
1. ใส่ "UTILITY" ในโฟลเดอร์ของ Primo ( Primoของท่าน\UTILITY\)
2. เปิด UTILITY \ utility.ini และตรวจสอบ การตั้งค่า ที่อยู่ ของ content และ save โฟลเดอร์ ของท่านให้ถูกต้อง
ตัวอย่าง :
[general]
DirContent=\SDMMC\Primo\content
DirSave=\SDMMC\Primo\save
3. ตรวจสอบ ไฟล์ .exe ของท่านว่าชื่ออะไร
ExeName = (iGo.exe หรือ Primo.exe หรือ ... )
4. ในโฟลเดอร์ Content ให้สร้างโฟลเดอร์ย่อย: ของแผนที่
4.1 สร้างโฟลเดอร์ map (ถ้าเริ่มต้นของคุณเป็นแผนที่ TA)
4.2 สร้างโฟลเดอร์ map_nt (สำหรับแผนที่ NT)
4.3 สร้างโฟลเดอร์ map_ot (สำหรับแผนที่อื่น ๆ )
และคัดลอกแผนที่ไปยังแต่ละโฟลเดอร์ให้ถูกชนิดของแผนที่ ที่กำหนดไว้
5. ถ้าต้องการเปลี่ยน POI ของแต่ละแผนที่ ไปพร้อมกับชนิดแผนที่
ให้ตั้งค่าใน utility.ini
swpoi = 1
และสร้างโฟลเดอร์ แบบเดียวกับ แผนที่ ดังนี้
5.1 สร้างโฟลเดอร์ POI (ถ้าเริ่มต้นของคุณเป็นแผนที่ TA)
5.2 สร้างโฟลเดอร์ poi_nt (สำหรับแผนที่ NT)
5.3 สร้างโฟลเดอร์ poi_ot (สำหรับแผนที่อื่น ๆ )
ในทำนองเดียวกันสามารถกำหนดค่าให้เปลี่ยนโฟลเดอร์ต่อไปนี้:
BUILDING (ตั้งค่าใน UTILITY.INI swbuilding = 1 และทำการสร้างโฟลเดอร์ building_ta, building_nt, building_ot)
HISTSPEED (ตั้งค่าใน UTILITY.INI swhistspeed = 1 และทำการสร้างโฟลเดอร์ histspeed_ta, histspeed_nt, histspeed_ot)
PHONEME (ตั้งค่าใน UTILITY.INI swphoneme = 1 และทำการสร้างโฟลเดอร์ phoneme_ta phoneme_nt, phoneme_ot)
6. เพื่อความถูกต้อง ในชนิดของแผนที่ กรุณาคัดลองไฟล์ ดังต่อไปนี้ลงไปยัง Folder ของแผ่นที่แต่ละชนิดให้ถูกต้อง
! map_ta.txt - สำหรับแผนที่ TA คัดลอกลงใน Folder map
! map_nt.txt - สำหรับแผนที่ Navteq คัดลอกลงใน Folder map_nt
! map_ot.txt - สำหรับแผนที่ผู้ให้บริการอื่น ๆ คัดลอกลงใน Folder map_ot
เพื่อป้องกันความผิดพลาดของ Mapchanger