วิธีทำให้ primo ขึ้น TMC ตามภาพด้านบน Change the sys.txt with the following values ( these were that they allowed me to receive the TMC correctly ), obviously the values of the deleted sections [GPS] and [tmc] to put these ... you need not be duplicated!
CODE[GPS]
port = "3"
baud = "9600"
source = "virtlserial"
[Tmc]
saved_config_available = "1"
saved_config_classname = "NMEA_GPSTMC_ROYALTEK"
saved_config_portname = "COM"
saved_config_port = "4"
saved_config_baud = "9600"
auto_tuning = "1"
saved_last_frequency = "937"
saved_last_tuning_mode = "1"
Delete the file " data.zip -> project_config -> igo9.ini "the following lines:
CODE[Modules]
IITINER_LIST_MANAGER = "IGO_SPEC_ITINER_LIST_MANAGER"
ITMC_STATION_SELECTOR = "TMC_STATION_SELECTOR_IGO"
IFM_STATION_FINDER = "FM_TMC_STATION_FINDER"
Now with the earphone cord attached (they work as an antenna) you should also receive information about TMC iGo First.
To me it is scanning services and TMC detects them on RAI RADIO
credit :http://whiterose.forumcommunity.net/?t=37846240