For anyone with a device that uses 320x240 resolution, i've quickly put together a skin for your device.
Download -> MioPocket Lite v8.0 (modified for 320x240 resolution)
Please download the file & extract it to the root of your SD card. You may also have to create a new folder and/or rename MioAutoRun.exe & MioAutoRun.mscr as per the following instructions.
1. Copy MioAutoRun.exe, MioAutoRun.mscr and Mortscript.exe to the root of your SD card, then rename them according to the following:
* c320, c520, c620, c720, c725 and c728: no renaming necessary †
* c310: rename MioAutoRun.exe to c310Auto.exe and MioAutoRun.mscr to c310Auto.mscr
* c510: rename MioAutoRun.exe to c510Auto.exe and MioAutoRun.mscr to c510Auto.mscr
* c710: rename MioAutoRun.exe to c710Auto.exe and MioAutoRun.mscr to c710Auto.mscr. If that doesn't work, rename them to Oscar200DM.exe and Oscar200DM.mscr
* c220 and c250: rename MioAutoRun.exe to oscar91adm.exe and MioAutoRun.mscr to oscar91adm.mscr. If that doesn't work, try the c230 names below.
* c230: rename MioAutoRun.exe to autorun_ABC.exe and MioAutoRun.mscr to autorun_ABC.mscr. If that doesn't work, rename them to goce.exe and goce.mscr
* h610: rename MioAutoRun.exe to H610Auto.exe and MioAutoRun.mscr to H610Auto.mscr
* 268+ and 269+: rename MioAutoRun.exe to autorunce.exe and MioAutoRun.mscr to autorunce.mscr
* Other Digiwalker models: try all of the above names to see if any of them work. If none work, look around online for clues as to what the filename needs to be for your particular device (the posters at
http://www.gpspassion.com should be able to help) or simply install to your flash disk (see below), instead.
† If you flashed your cx20 (esp. c520 or c320) to Mio's new software or your model came with Navman software out-of-the-box and the above does not work, follow steps 4Bia and 4Bib below (ignore that they're for Moovs).
ii. Skip to Step 2.
1B) Mio Moov models only:
i. Create, in the root of your SD card, a folder with one of the following "Cobia" names, depending on your model (Note: filenames ARE case-sensitive):
* Moov 150 (European: Cobia_300L_32, North American: Cobia_300L_32_NA, Australian: Cobia_300L_32_AU)
* Moov 200 (European: Cobia_300_32, North American: Cobia_300_64_NA, Australian: Cobia_300_32_AU)
* Moov 210 (European: Cobia_T300_32, North American: Cobia_T300_64_NA, Australian: Cobia_T300_32_AU)
* Moov 300 (European: Cobia_400_64, North American: Cobia_400_64_NA, Australian: Cobia_400_64_AU)
* Moov 310 (European: Cobia_T400_64, North American: Cobia_T400_64_NA, Australian: Cobia_T400_64_AU)
* Moov 330 (European: Cobia_410_64, North American: Cobia_410_64_NA, Australian: Cobia_410_64_AU)
* Moov 360 (European: Cobia_420_64, North American: Cobia_420_64_NA, Australian: Cobia_420_64_AU)
* Moov 370 (European: Cobia_T420_64, North American: Cobia_T420_64_NA, Australian: Cobia_T420_64_AU)
* Moov 500 (European: Cobia_500_64, North American: Cobia_500_64_NA, Australian: Cobia_500_64_AU)
* Moov 500 R2 (European: Cobia500R2, North American: Cobia500R2_NA, Australian: Cobia500R2_AU)
* Moov 580 (European: Cobia_T550_64, North American: Cobia_T550_64_NA, Australian: Cobia_T550_64_AU)
* Knight Rider: KITT_USA
Example: \Storage Card\Cobia_400_64_NA
If the above does not help you to find the correct folder to use, connect your Moov to your computer and...
a) If you have a file named "app_startup.txt" in the root of your flash drive...
Open it, scroll down to the very bottom and look for the line that starts with RunSDCardExecutable. That line will look something like this...
RunSDCardExecutable(SmartST_CE - Run()): CreateProcess(\Storage card\FOLDER\auto.exe) failed, error 2
...with FOLDER being the folder name that your device requires. Create that folder on your SD card.
b) If you have a file named "version.ini" on the flash drive in \Program Files\Navman\SmartST_CE\...
Open it, look under the [VersionInfo] section for the "Name" entry. Create that folder on your SD card.
If, for whatever reason, the app_startup.txt and version.ini methods do not work for you, read the firmware version listed (usually in white on black text) when you boot the device up and use the first code that comes after "Cobia." For example, the Moov360's firmware version starts with "COBIA 420", so the folder should start with "Cobia_420" (note the capitalized first letter, the following lower-case and the underscore). After that, for most devices, comes the amount of internal RAM, "_32" for 32MB devices and "_64" for 64MB devices. Finally, North American models append "_NA" on the end and Australian models append "_AU" on the end.
If nothing works for you, try re-formatting your SD card or using an entirely different card, then look for an answer in the forums at
www.gpspassion.comii. Next, copy MioAutoRun.exe, MioAutoRun.mscr and MortScript.exe to the Cobia folder that you just created and rename the first two to Auto.exe and Auto.mscr, respectively. If this doesn't work, try renaming them to auto.exe and auto.mscr. Also make sure that you are not renaming MioAutoRun.exe to auto.exe.exe (because some operating systems hide the file extension).
iii. Skip to Step 2.
1C) Asian Mios only
i. Create, in the root of your SD card, a folder named for your model (ex. "C320" for the Asian c320 and "C230" for the Asian C230).
ii. Next, copy MioAutoRun.exe, MioAutoRun.mscr and MortScript.exe to the folder that you just created and rename the first two to Auto.exe and Auto.mscr, respectively.
iii. Skip to Step 2.
1D) Non-Mio devices
Warning: Some obscure GPS devices (especially no-name Chinese GPS devices) do not revert Windows back to an unmodified condition when you perform a hard reset. You are advised against putting MioPocket on such devices because there is no way to undo any undesirable changes and you might permanently brick your unit. Most reputable brands, including all of the following, are fine.
Navigon: Copy MioAutoRun.exe, MioAutoRun.mscr and MortScript.exe to the root of your SD card, then rename MioAutoRun.exe to AutoRunCE.exe and MioAutoRun.mscr to AutoRunCE.mscr. If that does not work, rename them to UpdateMe.exe and UpdateMe.mscr.
Asus: Copy MioAutoRun.exe, MioAutoRun.mscr, MortScript.exe and ASUS_UserFlashCopy.dll to the root of your SD card. No renaming is needed.
Becker: Copy MioAutoRun.exe, MioAutoRun.mscr and MortScript.exe to the root of your SD card, then rename MioAutoRun.exe to AutoRun.exe and MioAutoRun.mscr to AutoRun.mscr.
2) If you have the USB cable attached, disconnect it. While your device is on, insert your SD card into your device. If it's already in, pop it out and back in. Alternately, on some devices, you may be able to initiate installation by tapping the power button once and then, once the screen goes off, once again. After a few seconds, an installation window should display on most devices. If it does not, perform a soft reset and see if that initiates installation. If you have a Mio Moov device, you may need to load up MioMap and wait for a GPS lock before exiting out and attempting installation. If your device simply freezes when you attempt installation, try re-formatting your SD card or using a different card. Once the installation window displays, about 10 seconds will go by and your device will reboot to complete the installation. Note: you will need to repeat this step after every hard reset or shutdown because those operations flush MioPocket (and anything else that you installed) from memory and return your device to factory condition.
Please let me know if it worked for you or the problems you've encountered if it didn't.
Thanks,
Kato250.
Navthai : ชุมชนผู้ใช้งาน GPS อันดับหนึ่งของไทย
